Editorial Product Review:

Item Description:
For use with PSH1. Spray medium to high solids including latex, acrylics, enamels, urethanes, mastics, heavy primers, sealers, fillers and epoxies.









Product Availability: Usually ships in 24 hours

---

More related to this product:
     click for more

More related to this product:

• Porter-Cable PSH1 Gravity Feed Spray Gun
• Porter Cable PTA30 20-Ounce Metal Paint Cup
• Porter-Cable PTA22 2.0mm Nozzle Kit (PSH1)
• Spray Finishing
• Spray Finishing and Other Techniques (New Best of Fine Woodworking)
• click for more

---

Customer Rating: - Buy this nozzle for latex applications
If you are spraying a latex product with an HVLP air sprayer, don't even bother with the 2.0mm nozzle kit - go straight to the 2.2mm Nozzle Kit. I have the Porter Cable HVLP air sprayer and I originally bought the 2.0mm nozzle and it would only work if I really watered down the paint. The problem with that is I hardly got any coverage and it was very runny.
So then I went with the 2.2mm Nozzle and I didn't have to thin the paint if I didn't want to. However, it did spray a little bit better when I added about 5-10% water and 10% Floetrol @ 45 PSI. The Floetrol will make the paint lay more evenly.
So if you need to spray latex paint, buy the 2.2mm Nozzle right away and you won't be disappointed.

---

Customer Rating: - Minnesota Charlie
I purchased the PSH1 sprayer based on the positive reviews of others. They suggested a large nozzle and so I had to choose between the 2.0 and 2.2. I went with the larger and the results are good. I sprayed the interior walls with latex KILZ then two coats of exterior latex house paint. I thinned the primer and paint at 10% with water and no trouble with plugging or spattering, nice finish to treated plywood, OSB, and pine board. I used a Makita MAC 2400 compressor to supply the air. Very glad I bought the sprayer because it saved me hours of labor if I used a roller and brush.

---

Customer Rating: - Works great on my Harbor Freight 43430 Gun

I own a Harbor Freight 43430 spray gun that is only available with a 1.3mm nozzle. HF does not offer other nozzles for the 43430. I had heard that the HF gun was identical to the PC PSH1 gun. While I do not know if they are identical, the PC 2.2 nozzle fits the HF 43430 perfectly and allows me to spray thicker coatings that are difficult/impossible to spray with the 1.3mm nozzle that comes with the HF 43430.